EasyManua.ls Logo

HPE ProLiant XL270d Gen9 - Rear Panel Components; Power Fault Leds

HPE ProLiant XL270d Gen9
146 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Item Description Status
6
iLO link LED Green = Linked to network
Off = No network connection
7 NIC link LED
1
Green = Linked to network
Off = No network connection
8 NIC activity LED
1
Green or flashing green = Network activity
Off = No network activity
1
When the LEDs described in this table flash simultaneously, a power fault has occurred. For more
information, see Power Fault LEDs.
2
Facility power is not present, power cord is not attached, no power supplies are installed, power supply
failure has occurred, or the front I/O cable is disconnected.
3
If the health LED indicates a degraded or critical state, review the system IML or use iLO to review the
system health status.
Rear panel components
Item Description
1 Fan connectors
2 Management riser connector
3 DC power cable module connectors
Power fault LEDs
The following table provides a list of power fault LEDs, and the subsystems that are affected. Not all power
faults are used by all servers.
Rear panel components 9

Table of Contents

Related product manuals