HPE ProLiant ML10 Gen9 User Manual

HPE ProLiant ML10 Gen9 Server
Maintenance and Service Guide
Abstract
This guide describes identification and maintenance procedures, diagnostic tools, specifications and requirements for hardware
components and software. This guide is for an experienced
service technician. Hewlett Packard Enterprise assumes that you are qualified
in the servicing of computer equipment, trained in recognizing hazards in products, and are familiar with weight and stability precautions.
Part Number: 833835-002
April 2016
Edition: 2

HPE ProLiant ML10 Gen9 Specifications

General

Form Factor	Tower
Processor Sockets	1
Memory Slots	4
Maximum Memory	64GB
Memory Type	DDR4
Storage Controller	Smart Array B140i controller
Hard Drive Bays	4 LFF
Drive Bays	4 LFF non-hot-plug
Maximum Internal Storage	24 TB
Network Interface	1 Gbps
Power Supply	350W
Operating System	Microsoft Windows Server, VMware, Linux
Management	HPE iLO 4

Summary

Illustrated Parts Catalog

Mechanical Components

Details on the mechanical parts of the server, including their identification and location.

Removal and Replacement Procedures

Safety and Handling Precautions

Covers essential safety guidelines, warnings, and electrostatic discharge (ESD) prevention.

Server Preparation Steps

Procedures for powering down and preparing the server for maintenance.

Component Replacement Procedures

Detailed instructions for replacing major hardware components like drives, system board, PSU.

Troubleshooting

Troubleshooting Resources

Information on accessing guides for resolving common problems and fault isolation.

Diagnostic Tools

Intel Management Tools

Details on Intel AMT, WebUI, and Rapid Storage Technology for system management.

Server BIOS Configuration

Information on the server BIOS and configuring it via the Setup Utility.

Component Identification

Front Panel Components

Identification of components located on the server's front panel.

System Board Components

Detailed identification of components located on the system board.

PCIe Expansion Slot Definitions

Specifications for the different PCIe expansion slots on the server.

Cabling

Storage Cabling

Procedures for connecting storage devices, including power and SATA cables.

Power Supply Cabling

Instructions for connecting the server's power supply unit to various components.