Front panel LEDs and buttons
Item Description Status
1
Power button/LED
1
Solid green = System on
Flashing green = Performing power on sequence
Solid amber = System in standby
Off = No power present
2
2 UID button/LED
1
Solid blue = Activated
• 1 flash per second = Remote management or firmware
upgrade in progress
• 4 flashes per second = iLO manual soft reboot
sequence initiated
• 8 flashes per second = iLO manual hard reboot
sequence in progress
Off = Deactivated
3 Health LED
1
Solid green = Normal
Flashing amber = System degraded
Flashing red = System critical
3
4
Do not remove LED Flashing white = Do not remove the node. Removing the
node may terminate the current operation and cause data
loss.
Off = The node can be removed.
5
iLO activity LED Green or flashing green = Network activity
Off = No network activity
Table Continued
8 Front panel LEDs and buttons
To Next Page
Loading...
