HPE ProLiant DL380 Gen10 Plus - Installing a Hot-Plug SAS, SATA or Nvme Drive

Installing a hot-plug SAS, SATA or NVMe driveInstalling a hot-plug SAS, SATA or NVMe drive
About this taskAbout this task
CAUTION:CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless all drive and device bays
are populated with either a component or a blank.
ProcedureProcedure
1. Remove the drive blank:
LFF drive blank
SFF drive blank
2. Prepare the drive.
LFF drive
SFF drive
Installing a hot-plug SAS, SATA or NVMe drive 129