4. (Optional) Install the Kensington security lock.
For more information, see the lock documentation.
Drive optionsDrive options
Depending on the drive backplane installed, the server supports the following drive types:
Hot-plug LFF hot-plug, SAS, and SATA
Hot-plug SFF SAS, SATA, NVMe
Hot-plug E3.S PCIe5 NVMe SSDs
The embedded Intel VROC for HPE Gen11 (Intel VROC) supports software RAID for direct attached SATA and NVMe drives.
To support hardware RAID, install a storage controller option .
SubtopicsSubtopics
Drive installation guidelinesDrive installation guidelines
Installing a hot-plug SAS, SATA or NVMe driveInstalling a hot-plug SAS, SATA or NVMe drive
Installing a hot-plug LFF SAS, SATA or NVMe drive in box three or box fiveInstalling a hot-plug LFF SAS, SATA or NVMe drive in box three or box five
Installing an E3.S driveInstalling an E3.S drive
Drive installation guidelinesDrive installation guidelines
Observe the following general guidelines:
The system automatically sets all drive numbers.
To Next Page
Loading...
