10. To configure the memory settings:
a. From the boot screen, press F9F9 to access UEFI System Utilities.
b. From the System Utilities screen, select System Utilities > System Configuration > BIOS/Platform Configuration (RBSU) > Memory
Options.
ResultsResults
The installation is complete.
Storage controller optionsStorage controller options
The server supports the following storage controllers:
Intel Virtual RAID on CPU (Intel VROC) —Provides enterprise-level hybrid RAID support for direct attached SATA and NVMe SSDs,
including M.2 SSDs.
HPE MR type-o and type-p Gen11 controllers
HPE SR type-p Gen11 controllers
For more information on drive array and storage controller configuration, see Configuring storage controllers.
When a tri-mode storage controller option is used together with a U.3 drive backplane, the system will support mixed drive configuration.
SubtopicsSubtopics
Preparing the server for storage controller installationPreparing the server for storage controller installation
Installing a type-p controllerInstalling a type-p controller
Installing a type-o storage controllerInstalling a type-o storage controller
Preparing the server for storage controller installationPreparing the server for storage controller installation
To Next Page
Loading...
