HPE ProLiant DL320 Gen11 - Results; HPE NS204 i Boot Device option; Installing the HPE NS204 i-u Boot Device

b. Connect each power cord to the power source.
16. If installed, close the cable management arm.
17. Power up the server .
ResultsResults
The installation is complete.
HPEHPE NS204i Boot Device NS204i Boot Device option option
Note the following information about the HPE NS204i Boot Device option:
The HPE NS204i-u Gen11 NVMe Hot Plug Boot Optimized Storage Device (NS204i-u) is a PCIe3 x4 custom form-factor module that
includes two hot-pluggable 2280 M.2 NVMe SSDs.
This boot device enables the deployed OS to be mirrored through a dedicated hardware RAID 1.
The boot device auto-creates a RAID1 volume during boot. This means the boot device does not require further RAID configuration.
This boot device is compatible with the following native OS:
Windows
Linux
VMware
This boot device uses native inbox OS NVMe drivers.
SubtopicsSubtopics
Installing the HPE NS204i-u Boot DeviceInstalling the HPE NS204i-u Boot Device
Installing the Installing the HPE NS204i-u Boot DeviceHPE NS204i-u Boot Device
HPE ProLiant DL320 Gen11 Server User Guide 146