20. Power up the server.
ResultsResults
The installation is complete.
Accelerator optionsAccelerator options
This server supports various accelerator options to meet your computational and graphics workload requirements. For a list of supported
accelerator models, see the server QuickSpecs on the Hewlett Packard Enterprise website (https://buy.hpe.com/us/en/p/1014689141https://buy.hpe.com/us/en/p/1014689141).
PCIe workload accelerators—These options are PCIe card–based, direct–attach solutions that use solid–state storage technology
directly on the PCI bus to boost I/O performance and reduce latency to scale in line with your processing requirements.
Computational and graphics accelerators—These options deliver accelerated compute performance for a range of deep learning, high–
performance computing (HPC), and graphics–intensive applications.
SubtopicsSubtopics
Accelerator installation guidelinesAccelerator installation guidelines
Installing an accelerator in the GPU riser cageInstalling an accelerator in the GPU riser cage
Installing an accelerator in the primary riser cageInstalling an accelerator in the primary riser cage
Accelerator installation guidelinesAccelerator installation guidelines
To support high-power accelerators (> TDP 75 W), the accelerator auxiliary power cable option ( P56661-B21) is required.
This server does not support the installation of different accelerator models in the same system.
To maintain proper system cooling, all seven high performance fans are required for accelerator installation.
The limited operating inlet ambient temperatures required for accelerators vary based on the model and the server drive configuration.
For more information, see the server QuickSpecs on the Hewlett Packard Enterprise website
(https://buy.hpe.com/us/en/p/1014689141https://buy.hpe.com/us/en/p/1014689141).
IMPORTANT:IMPORTANT: Workloads for high performance accelerators with passive cooling can cause the fans to operate at high
speeds to maintain optimum system cooling. Hewlett Packard Enterprise does not recommend installing accelerators with
passive cooling in or near a site where there is a reasonable expectation for a quiet environment.
Installing an accelerator in the GPU riser cageInstalling an accelerator in the GPU riser cage
PrerequisitesPrerequisites
Review the accelerator installation guidelines.
Before you perform this procedure, make sure that you have the following items available:
T-15 Torx screwdriver
T-10 Torx screwdriver
About this taskAbout this task
To Next Page
Loading...
