13. Install the access panel .
14. Install the server into the rack.
15. Connect all peripheral cables to the server.
16. Connect the power cords:
a. Connect each power cord to the server.
b. Connect each power cord to the power source.
17. Power up the server.
ResultsResults
The installation is complete.
Memory optionMemory option
The server has 12 DIMM slots supporting HPE DDR5 SmartMemory (RDIMM) .
The arrow points to the front of the server.
SubtopicsSubtopics
HPE SmartMemory speed and population informationHPE SmartMemory speed and population information
DIMM installation guidelinesDIMM installation guidelines
Installing a DIMMInstalling a DIMM
HPEHPE SmartMemory speed and population information SmartMemory speed and population information
For information about memory speed and server-specific DIMM population rules for HPE servers using AMD EPYC 9004 Series Processor ,
To Next Page
Loading...
