ResultsResults
The installation is complete.
Installing a DC power supplyInstalling a DC power supply
PrerequisitesPrerequisites
Before installing a power supply, review the following:
Power supply warnings and cautions
DC power supply warnings and cautions
DC power supply wire colors
Before you perform this procedure, make sure that you have a Phillips No. 2 screwdriver available.
Before connecting the power cables, review the following:
The optional P36877-B21 HPE lug kit can be purchased from an authorized HPE reseller for use with customer-supplied power
cables. (The power cable and lug kit listed below can only be used with the 1600 W -48 VDC power supply.)
If you are using an input power cord option, the P22173-B21 HPE 1600 W DC PSU power cable kit can be purchased from an
authorized HPE reseller.
The DC power supply option kits do not ship with a Power Supply DC cable Kit and may not include a Power Supply Cable Lug kit.
The optional DC Cable kit or the optional DC Cable Lug Kit may be purchased directly from Hewlett Packard Enterprise or an
authorized HPE reseller. For additional information, see the power supply QuickSpecs at https://www.hpe.com/info/fsps-qshttps://www.hpe.com/info/fsps-qs.
About this taskAbout this task
If you are not using an input power cord option, the power supply cabling must be made in consultation with a licensed electrician and be
compliant with local code.
To Next Page
Loading...
