11. Connect the front USB and DisplayPort cable to the system board .
12. Install the middle cover .
13. Install the access panel .
14. Install the server into the rack.
15. Connect all peripheral cables to the server.
16. Connect the power cords:
a. Connect each power cord to the server.
b. Connect each power cord to the power source.
17. Power up the server.
18. Install the front bezel .
ResultsResults
The installation is complete.
Fan optionsFan options
To provide sufficient airflow to the system, the server is by default populated by seven fans. The fans can either be standard fans ( P58461-
B21) or high performance fans ( P58462-B21). Mixed fan configuration is not supported.
To Next Page
Loading...
