Power up the serverPower up the server
ProcedureProcedure
Press the Power On/Standby button.
Use the virtual power button through iLO 6.
Hardware options installationHardware options installation
This chapter provides instructions for installing supported hardware options. To ensure proper server deployment and operation, Hewlett
Packard Enterprise recommends installing only HPE‑validated hardware options. To see the list of validated options for this server, see the
product QuickSpecs on the HPE ProLiant DL325 Gen11 Server website:
https://buy.hpe.com/us/en/p/1014689141https://buy.hpe.com/us/en/p/1014689141
To view the warranty for your server and supported options, see Warranty information.
SubtopicsSubtopics
Server data backupServer data backup
Hardware option installation guidelinesHardware option installation guidelines
Rack mounting optionsRack mounting options
Installing the front bezel optionInstalling the front bezel option
Power supply optionsPower supply options
Transceiver optionTransceiver option
Drive optionsDrive options
Drive cage optionsDrive cage options
Installing an 8 SFF drive backplane optionInstalling an 8 SFF drive backplane option
Optical drive optionOptical drive option
Installing the front USB and DisplayPort optionInstalling the front USB and DisplayPort option
Fan optionsFan options
Memory optionMemory option
Riser cage optionsRiser cage options
Storage controller optionsStorage controller options
Energy pack optionsEnergy pack options
Expansion card optionsExpansion card options
Accelerator optionsAccelerator options
HPE NS204i-u Boot Device optionHPE NS204i-u Boot Device option
M.2 SSD pass-through card optionM.2 SSD pass-through card option
OCP NIC 3.0 adapter optionOCP NIC 3.0 adapter option
High performance heatsink optionHigh performance heatsink option
To Next Page
Loading...
