HPE ProLiant DL325 Gen11 - Riser Cage Options

9. Install the access panel .
10. Install the server into the rack.
11. Connect all peripheral cables to the server.
12. Connect the power cords:
a. Connect each power cord to the server.
b. Connect each power cord to the power source.
13. Power up the server.
14. To configure the memory settings:
a. From the boot screen, press F9F9 to access UEFI System Utilities.
b. From the System Utilities screen, select System Utilities > System Configuration > BIOS/Platform Configuration (RBSU) > Memory
Options.
ResultsResults
The installation is complete.
Riser cage optionsRiser cage options
The primary riser cage is default in the server. Two secondary riser cage options are supported:
Secondary riser cage
NS204i-u + secondary low-profile riser cage
For detailed information on riser option configurations, go to https://psnow.ext.hpe.com/doc/a00128578enwhttps://psnow.ext.hpe.com/doc/a00128578enw.
SubtopicsSubtopics
Installing the secondary riser cageInstalling the secondary riser cage
Installing the NS204i-u + secondary low-profile riser cageInstalling the NS204i-u + secondary low-profile riser cage
HPE ProLiant DL325 Gen11 Server User Guide 123