5. Install the drive.
NOTE:NOTE:
To make sure that the drive has installed successfully, make sure that the latch is engaged with the drive cage.
6. Determine the status of the drive from the drive LED definition .
7. Install the front bezel .
8. To configure drive arrays, see the relevant storage controller guide .
ResultsResults
The installation is complete.
Drive cage optionsDrive cage options
SubtopicsSubtopics
Installing the 2 SFF side-by-side drive cage optionInstalling the 2 SFF side-by-side drive cage option
Installing the 4 SFF NVMe drive cage optionInstalling the 4 SFF NVMe drive cage option
Installing the 8 E3.S drive cage optionInstalling the 8 E3.S drive cage option
Installing the 2 SFF side-by-side drive cage optionInstalling the 2 SFF side-by-side drive cage option
To Next Page
Loading...
