2. Install the Kensington security lock.
Powering up the server
Procedure
1.
Remove the bezel.
2.
Use one of the following methods to power up the server:
• Press the Power On/Standby button.
• Use the virtual power button through iLO.
3.
Install the bezel.
Powering down the server
IMPORTANT: When the server is in standby mode, auxiliary power is still being provided to the system.
Prerequisites
Before powering down the server for any upgrade or maintenance procedures, perform a backup of critical server data
and programs.
Procedure
1.
Remove the bezel.
2. To power down the server, use one of the following methods.
• Press and release the Power On/Standby button.
Operations 27
To Next Page
Loading...
