c. Install the secondary riser.
d. Install the controller.
9.
Connect all necessary internal cabling to the expansion board.
For more information on these cabling requirements, see the documentation that ships with the option.
10.
Install the access panel.
11.
Install the server into the rack.
12.
Connect all necessary external cabling to the expansion board.
For more information on these cabling requirements, see the documentation that ships with the option.
13.
Connect all peripheral cables to the server.
14.
Connect each power cord to the server.
15.
Connect each power cord to the power source.
16.
Power up the server.
The installation is complete.
Installing the GPU
Prerequisites
• Before you perform this procedure, make sure that you have the following items available:
◦ GPU enablement option
◦ T-15 Torx screwdriver
• Before you perform this procedure, make sure that the fan in the fan bay 7 is installed.
Hardware options installation 69
To Next Page
Loading...
