8.
Install the riser cage.
9.
Install the access panel.
10.
Install the server into the rack.
11.
Connect the LAN segment cables.
12.
Connect each power cord to the server.
13.
Connect each power cord to the power source.
14.
Power up the server.
The installation is complete.
Installing a 1U or high performance heatsink
This procedure shows a standard heatsink as an example. The installation process is the same for all heatsinks.
Hewlett Packard Enterprise recommends
identifying the processor, heatsink, and socket components before performing
this procedure.
Prerequisites
Before you perform this procedure, make sure that you have the following items available:
• The components included with the hardware option kit
• T-30 Torx screwdriver
• Thermal grease
Hardware options installation
145
To Next Page
Loading...
