HPE ProLiant DL380 Gen10 - System Maintenance Switch Descriptions

Item Description
5 x4 SATA port 1
6 x4 SATA port 2
7 x2 SATA port 3
8 x1 SATA port 4
9 Optical disk drive/SATA port 5
10 Power switch/SID module connector
11 Drive backplane power connectors
12 Energy pack connector
13 Chassis intrusion detection connector
14 Drive backplane power connector
15 microSD card slot
16 Dual internal USB 30 ports
17 Type-a Smart Array connector
18 Secondary PCIe riser connector*
19 System battery
20 Tertiary PCIe riser connector*
21 TPM connector
22 Serial port connector (optional)
* Requires a second processor
System maintenance switch descriptions
Position
Default Function
S1
1
O
O = iLO security is enabled.
On = iLO security is disabled.
S2 O Reserved
S3 O Reserved
S4 O Reserved
S5
1
O
O = Power-on password is enabled.
On = Power-on password is disabled.
S6
1, 2, 3
O
O = No function
On = Restore default manufacturing settings
S7 O Reserved
Table Continued
Component identification 20