HPE ProLiant MicroServer Gen10 Plus User Manual

Software and configuration utilities
Server mode
The software and configuration utilities presented in this section operate in online mode, oline mode, or in both modes.
Software or configuration utility Server mode
Active Health System Online and Oline
HPE iLO 5 Online and Oline
HPE Smart Storage Administrator Online and Oline
iLO RESTful API Online and Oline
Intelligent Provisioning Online and Oline
Scripting Toolkit for Windows and Linux Online
Service Pack for ProLiant Online and Oline
Smart Update Manager Online and Oline
UEFI System Utilities Oline
Product QuickSpecs
For more information about product features, specifications, options, configurations, and compatibility, see the product
QuickSpecs on the Hewlett Packard Enterprise website (https://www.hpe.com/info/qs).
Active Health System Viewer
Active Health System Viewer (AHSV) is an online tool used to read, diagnose, and resolve server issues quickly using AHS
uploaded data. AHSV provides Hewlett Packard Enterprise recommended repair actions based on experience and best
practices. AHSV provides the ability to:
• Read server configuration information
• View Driver/Firmware inventory
• Review Event Logs
• Respond to Fault Detection Analytics alerts
• Open new and update existing support cases
Active Health System
The Active Health System monitors and records changes in the server hardware and system configuration.
Software and configuration utilities
65

HPE ProLiant MicroServer Gen10 Plus Specifications

General

Processor Cores	4
Memory Slots	2
Network	2 x 1GbE ports
Processor	Intel Xeon E-2224
Processor Base Frequency	3.4 GHz
Storage	4 LFF SATA HDD bays
Storage Controller	Embedded SATA controller
Expansion Slots	1 PCIe 3.0 x16 slot
Form Factor	Ultra-micro tower
Remote Management	HPE iLO 5
Operating System Support	Microsoft Windows Server, Red Hat Enterprise Linux, VMware ESXi
Dimensions	22.97 x 24.5 x 24.5 cm (8.98 x 9.65 x 9.65 in)