EasyManuals Logo

HPE ProLiant MicroServer Gen10 Plus User Manual

HPE ProLiant MicroServer Gen10 Plus
89 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #73 background imageLoading...
Page #73 background image
HPE InfoSight for servers:
Combines the machine learning and predictive analytics of HPE InfoSight with the health and performance monitoring
of Active Health System (AHS) and HPE iLO to optimize performance and predict and prevent problems
Provides automatic collection and analysis of the sensor and telemetry data from AHS to derive insights from the
behaviors of the install base to provide recommendations to resolve problems and improve performance
For more information on getting started and using HPE InfoSight for servers, go to: https://www.hpe.com/info/
infosight-servers-docs.
USB support
Hewlett Packard Enterprise Gen10 and Gen10 Plus servers support all USB operating speeds depending on the device
that is connected to the server.
External USB functionality
Hewlett Packard Enterprise provides external USB support to enable local connection of USB devices for server
administration, configuration, and diagnostic procedures.
For additional security, external USB functionality can be disabled through USB options in UEFI System Utilities.
Redundant ROM support
The server enables you to upgrade or configure the ROM safely with redundant ROM support. The server has a single
ROM that acts as two separate ROM images. In the standard implementation, one side of the ROM contains the current
ROM program version, while the other side of the ROM contains a backup version.
NOTE: The server ships with the same version programmed on each side of the ROM.
Safety and security benefits
When you flash the system ROM, the flashing mechanism writes over the backup ROM and saves the current ROM as a
backup, enabling you to switch easily to the alternate ROM version if the new ROM becomes corrupted for any reason.
This feature protects the existing ROM version, even if you experience a power failure while flashing the ROM.
Keeping the system current
Updating firmware or system ROM
To update firmware or system ROM, use one of the following methods:
The Firmware Update option in the System Utilities.
The fwupdate command in the Embedded UEFI Shell.
Service Pack for ProLiant (SPP)
HPE online flash components
Moonshot Component Pack
Software and configuration utilities
73

Table of Contents

Other manuals for HPE ProLiant MicroServer Gen10 Plus

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HPE ProLiant MicroServer Gen10 Plus and is the answer not in the manual?

HPE ProLiant MicroServer Gen10 Plus Specifications

General IconGeneral
Processor Cores4
Memory Slots2
Network2 x 1GbE ports
ProcessorIntel Xeon E-2224
Processor Base Frequency3.4 GHz
Storage4 LFF SATA HDD bays
Storage ControllerEmbedded SATA controller
Expansion Slots1 PCIe 3.0 x16 slot
Form FactorUltra-micro tower
Remote ManagementHPE iLO 5
Operating System SupportMicrosoft Windows Server, Red Hat Enterprise Linux, VMware ESXi
Dimensions22.97 x 24.5 x 24.5 cm (8.98 x 9.65 x 9.65 in)

Related product manuals