HPE ProLiant MicroServer Gen10 Plus User Manual

3. If you prefer to secure the bezel to the chassis, switch the bezel locks downward.
4.
If removed, install the chassis cover.
5.
If removed, install the security padlock and/or the Kensington security lock.
For more information, see the lock documentation.
6.
Connect all peripheral cables to the server.
7.
Connect the power adapter to the server, and then secure the power adapter cord in the power cord clip.
8. Connect the power cord to the AC source.
9.
Power up the server.
Removing the chassis cover
To access the front bezel locks, remove the chassis cover.
18
Operations

HPE ProLiant MicroServer Gen10 Plus Specifications

General

Processor Cores	4
Memory Slots	2
Network	2 x 1GbE ports
Processor	Intel Xeon E-2224
Processor Base Frequency	3.4 GHz
Storage	4 LFF SATA HDD bays
Storage Controller	Embedded SATA controller
Expansion Slots	1 PCIe 3.0 x16 slot
Form Factor	Ultra-micro tower
Remote Management	HPE iLO 5
Operating System Support	Microsoft Windows Server, Red Hat Enterprise Linux, VMware ESXi
Dimensions	22.97 x 24.5 x 24.5 cm (8.98 x 9.65 x 9.65 in)