Need help?Do you have a question about the HPE ProLiant ML30 Gen10 Plus and is the answer not in the manual?
General| Processor Sockets | 1 |
|---|---|
| Memory | Up to 128 GB DDR4 ECC UDIMM |
| Memory Slots | 4 |
| Form Factor | 4U tower |
| Chipset | Intel C256 |
| Processor | Intel Xeon E-2300 series |
| Storage | Up to 4 LFF or 8 SFF drives |
| RAID Support | HPE Smart Array S100i SR Gen10 (Software RAID) |
| Storage Controller | Optional HPE Smart Array controllers |
| Maximum Internal Storage | Up to 64 TB |
| Network | 1 GbE |
| Power Supply | 350W |
| Remote Management | HPE iLO 5 |
| Operating System Support | Windows Server, VMware |
Explains procedures for user-replaceable parts and warranty service.
Detailed instructions for servicing various server components.
Procedures for removing and installing server drives.
Steps for removing and installing power supply units.
Comprehensive guide for replacing the CPU.
Detailed procedure for replacing the system motherboard.
Essential safety precautions for handling the server and its components.
Guides and information for diagnosing and resolving server issues.
Procedures for updating server firmware and BIOS settings.
Steps for setting up and configuring server parameters and options.
Identifies external and internal server features, ports, and components.
Identifies LEDs, buttons, and ports on the server's front panel.
Identifies ports, slots, and LEDs on the server's rear panel.
Details connectors, slots, and features on the system board.
Operating conditions like temperature, humidity, and altitude.
Details on different power supply models and their performance characteristics.
General rules and diagrams for internal component cabling.
Diagrams and instructions for connecting storage devices.
Information on how to get technical assistance and documentation.
To Next Page