Removing and replacing a DIMMRemoving and replacing a DIMM
Heatsink replacementHeatsink replacement
Processor replacementProcessor replacement
Removing and replacing an expansion cardRemoving and replacing an expansion card
Removing and replacing the energy packRemoving and replacing the energy pack
Removing and replacing the energy pack holderRemoving and replacing the energy pack holder
Removing and replacing an M.2 SSDRemoving and replacing an M.2 SSD
Removing and replacing the iLO-M.2-serial moduleRemoving and replacing the iLO-M.2-serial module
M.2 SATA SSD replacementM.2 SATA SSD replacement
HPE NS204i-p NVMe OS Boot Device replacementHPE NS204i-p NVMe OS Boot Device replacement
Removing and replacing an internal USB deviceRemoving and replacing an internal USB device
Removing and replacing the front I/O assemblyRemoving and replacing the front I/O assembly
Removing and replacing the front USB cableRemoving and replacing the front USB cable
Removing and replacing the serial port cableRemoving and replacing the serial port cable
Removing and replacing the serial port blankRemoving and replacing the serial port blank
Removing and replacing the iLO dedicated network port blankRemoving and replacing the iLO dedicated network port blank
Removing and replacing the power distribution boardRemoving and replacing the power distribution board
System battery replacementSystem battery replacement
System board replacementSystem board replacement
Safety considerationsSafety considerations
Before performing service procedures, review all the safety information.
SubtopicsSubtopics
Electrostatic dischargeElectrostatic discharge
Symbols on equipmentSymbols on equipment
Rack warnings and cautionsRack warnings and cautions
Server warnings and cautionsServer warnings and cautions
Electrostatic dischargeElectrostatic discharge
Be aware of the precautions you must follow when setting up the system or handling components. A discharge of static electricity from a
finger or other conductor may damage system boards or other static-sensitive devices. This type of damage may reduce the life expectancy
of the system or component.
To prevent electrostatic damage:
Avoid hand contact by transporting and storing products in static-safe containers.
To Next Page
Loading...
