18. Properly dispose of the old battery.
For more information about proper battery disposal, contact an authorized reseller or an authorized service provider.
System board replacementSystem board replacement
SubtopicsSubtopics
Removing the system boardRemoving the system board
Installing the system boardInstalling the system board
Re-entering the server serial number and product IDRe-entering the server serial number and product ID
Removing the system boardRemoving the system board
PrerequisitesPrerequisites
Perform a backup of critical server data .
Before you perform this procedure, make sure that you have the following items available:
T-15 Torx screwdriver
Hex screwdriver—This tool is required only if the serial port cable is installed.
Alcohol wipe
About this taskAbout this task
WARNING:WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the internal system components to
cool before touching them.
CAUTION:CAUTION:
A discharge of static electricity from a finger or other conductor might damage system boards or other static-sensitive
devices. To prevent damage, observe antistatic precautions.
ProcedureProcedure
1. Power down the server.
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3. Disconnect all peripheral cables from the server.
4. Do one of the following:
To Next Page
Loading...
