The procedure is complete.
Processor replacementProcessor replacement
SubtopicsSubtopics
Processor cautionsProcessor cautions
Removing the processorRemoving the processor
Installing the processorInstalling the processor
Processor cautionsProcessor cautions
CAUTION:CAUTION: To avoid damage to the processor or system board, only authorized personnel should attempt to replace or
install the processor in this server.
CAUTION:CAUTION: If installing a processor with a faster speed, update the system ROM before installing the processor.
To download firmware and view installation instructions, see the Hewlett Packard Enterprise Support Center websiteHewlett Packard Enterprise Support Center website .
CAUTION:CAUTION: THE CONTACTS ARE VERY FRAGILE AND EASILY DAMAGED. THE CONTACTS ARE VERY FRAGILE AND EASILY DAMAGED. To avoid damage to the socket or processor, do
not touch the contacts.
Removing the processorRemoving the processor
PrerequisitesPrerequisites
Review the processor cautions .
Before you perform this procedure, make sure that you have the following items available:
T-15 Torx screwdriver
Alcohol wipe
If you are not immediately installing the new processor, make sure that you have the protective cover for the processor socket.
About this taskAbout this task
CAUTION:CAUTION:
A discharge of static electricity from a finger or other conductor might damage system boards or other static-sensitive
devices. To prevent damage, observe antistatic precautions.
ProcedureProcedure
To Next Page
Loading...
