To Next PageTo Next Page
Need help?Do you have a question about the HPE ProLiant ML30 Gen10 and is the answer not in the manual?
General| Processor Sockets | 1 |
|---|---|
| Memory | Up to 64 GB DDR4 ECC UDIMM |
| Memory Slots | 4 |
| Storage | Up to 4 LFF or 8 SFF drives |
| Form Factor | 4U Tower |
| Processor | Intel Xeon E-2100 series |
| Storage Controller | HPE Smart Array S100i SR Gen10 (Software RAID) |
| Network | 2x 1GbE Ethernet ports |
| Expansion Slots | 1 PCIe 3.0 x16, 1 PCIe 3.0 x8, 1 PCIe 3.0 x4 |
| Power Supply | 350W |
| Operating System Support | Windows Server, Red Hat Enterprise Linux, SUSE Linux Enterprise Server, VMware |
Locates key connectors and slots on the motherboard.
Explains drive status indicators and bay numbering for different configurations.
Procedures for powering the server on, off, and to standby mode.
Steps for extending, removing, and sliding the server into a rack.
Lists necessary downloads, OS support, and documentation to review.
Specifies space, airflow, temperature, power, and grounding requirements.
Covers warnings for handling, ESD, and rack installation.
Details POST screen options and OS installation considerations.
Procedures for installing various types of drives and media devices.
Guides for installing DIMMs and storage controllers.
Details on power supplies, redundancy, and expansion boards.
Covers iLO features, federation, service port, and API for remote management.
Tools for OS deployment, system setup, boot modes, and security.
Utilities for firmware updates, system management, and storage configuration.
Step-by-step instructions for replacing the system battery.
