Need help?Do you have a question about the HPE StoreFabric SN2010M and is the answer not in the manual?
General| Form Factor | 1U |
|---|---|
| Packet Buffer Size | 16 MB |
| Input Voltage | 100-240V AC |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Cooling | Front-to-back airflow |
| Latency | 300 ns |
| CPU | Dual-core |
| Management | CLI, SNMP |
| Power Supply | Internal dual redundant power supplies |
| Operating Relative Humidity | 10% to 90% non-condensing |
Provides comprehensive safety warnings for installation in multiple languages and contexts.
Steps for powering on the system, bringing it online, and initial configuration.
Information on replacing Field Replaceable Units (FRUs) like power supplies and fans.
Overview of system LEDs, including status, fan, power, and port indicators.
Guidance on obtaining and applying software and firmware updates for the systems.
Provides solutions for common problems indicated by system LEDs, boot failures, etc.
Detailed specifications for the SN2700M switch model, including mechanical, environmental, and power.
Detailed specifications for SN2410M/SN2410bM models: mechanical, environmental, power, etc.
To Next Page