Need help?Do you have a question about the HPI Racing Trophy 4.6 truggy and is the answer not in the manual?
General| Displacement | 4.6cc |
|---|---|
| Drive Type | 4WD |
| Scale | 1/8 |
| Engine | HPI F4.6 |
| Power | 2.9hp |
| Transmission | 2-Speed |
| Chassis | Aluminum |
| Radio System | 2.4GHz |
Lists the main components and necessary tools/accessories for the RC car.
Instructions for preparing the glow plug igniter, transmitter, and chassis for use.
Steps for filling the fuel tank, priming the engine, and initial running.
Instructions for starting the engine and carburetor adjustment.
Procedures for safely stopping the motor and turning off the RC unit.
Steps for breaking in the engine using specific fuel tank cycles.
Instructions for tuning the engine for optimal performance after break-in.
Tips for adjusting the carburetor based on engine temperature.
Adjusting idle speed screw and low speed needle.
Diagnosing and fixing common problems with the engine and RC system.
Overview of maintenance tasks and routine cleaning of the chassis.
Procedures for cleaning the air filter and setting up the radio system.
Steps for assembling the clutch, wheels, and suspension components.
Instructions for assembling gearboxes, differentials, and chassis parts.
Steps for assembling shocks, steering, and installing the engine.
Instructions for installing muffler, fuel tank, and mounting wheels.
Procedures for maintaining the Nitro Star F4.6 engine after use.
Steps for disassembling, repairing, and reassembling the engine.
A complete list of all part numbers and their descriptions.
To Next Page