Factory setting
The user menu Group U can set up to 16 parameters, of which there are 14 parameters have
been set.
No. Setting value No. Setting value
U00.00 00.01 (control mode selection) U00.14 03.01 (acceleration time 1)
U00.02
00.06 (inverter maximum
output frequency)
U00.16 03.02 (deceleration time 1)
U00.04
00.08 (upper limit of operation
frequency)
U00.18 08.00 (motor rated power)
U00.06
00.13 (starting frequency digital
setting)
U00.20 08.01 (motor rated voltage)
U00.08
00.10 (frequency setting
sources selection)
U00.22 08.02 (motor rated current)
U00.10
00.11 (command setting source
selection)
U00.24 08.03 (motor rated frequency)
U00.12 02.13 (stop mode selection) U00.26 08.04 (motor rated RPM)
To Next Page
Loading...
Need help?
General