Shenzhen Hpmont Technology Co., Ltd Appendix A Parameters
HD30 Series Inverters User Manual －139－
Appendix A Parameters
Attributes are changed:
”*”: It denotes that the value of this parameter is the actual value which cannot be modified.
“
×
”: It denotes that the setting of this parameter cannot be modified when the inverter is in run
status.
”
○
”: It denotes that the setting of this parameter can be modified when the inverter is in run
status.
“―”: The same as the mapping functional parameter.
: It denotes that this parameter is enabled when using corresponding extension option.
A
To Next Page
Loading...
Need help?
General