General Information
5
2.2 Specification
Item Name
Wattage
Volts
White
Luminous flux
Color
Changing
Dimmable
SP-PN01DC 36W 110V 3000lm YES YES
2.3 Installation
Precaution
Keep people out of the swimming pool when you operate the installation.
Always turn off the main electrical switch or circuit breaker.
1. Remove the old face ring, then remove the light assembly from the niche. Put the face
ring and the light on the pool deck.
2. Please disassemble the old light and disconnect the wires. Use a fish tape reel puller
to remove the old electric cord. You have to do so because we use 5C cable for the
RGBW system.
3. Please open the waterproof junction box of the M4-3A receiver, and disconnect the
outlet (5 pin side). Pull the new electric cord out from the power supply side through
the conduit and reserve enough cords on the LED light side so you could replace the
Full Waterproof LED light Assembly with 100’ cord and Face Ring
To Next Page
Loading...
