Memory-recall of measurements
Read memory record
Memory -clear of measurements
About blood pressure
This blood pressure monitor automatically stores 2x90 sets
measurements value, the oldest record will be replaced by the
latest measurement value when more than 90 sets each user.
Press the button + or - when power off, the latest 3 times average
value will be shown, press the button + again, the oldest
measurement value will be shown, or press the button - again, the
latest measurement value will be shown, as well as subsequent
measurements can be dispaly one after the other by pressing the
button + or - each time.
If you are sure that you want to permanently remove all stored
memories.Press the button SET for 6 times until CL appears when
power off, press the START/STOP button ,CL will flash for 3 times
to clear all the memories. After this press button MEM, M and
“no” will be shown on the display which mean that no memory in
store.
Blood pressure is the pressure exerted the arteries.
The systolic blood pressure value represents the blood pressure
produced by contraction of the heart muscle.
The diastolic blood pressure value represents the blood pressure
produced by relaxation of the heart muscle.
About blood pressure
15/25
Diastolic blood pressure
Systolic blood pressure
Contraction of the
heart muscle
Extrude blood
ressure increased
to the blood vesse
Higher pressure
P
l
Relaxation of the
heart muscle
Blood return heart
Pressure decreased to
the blood vessel
Lower pressure
To Next Page
Loading...