in winter, start at 6 and lower the
setting until condensation appears,
then raise up one level again.
6 Heat Exchange symbol
When this symbol is active the
system is recovering energy from the
house.
7 Fan Speed icon
Shows the speed at which the fan
blows air into your house.
8 Ideal temperature
Desired temperature you would
like to reach inside your house.
Note:Your system will try to achieve
this temperature with the heating
orcooling that is available in the
roof space.
9 Up and Down arrow buttons
Used to adjust the ideal (desired)
temperature for the house.
10 Menu button
Gives access to the sub menus.
11 Cooling icon
When the system is trying to cool
the house to ideal temperature,
this symbol will show. The arrows
and house temperature numbers
will also indicate this state with the
colour blue.
12 Filter Replacement icon
This icon indicates your filter needs
to be changed. We recommend you
change your filter every 2 years.
13 House arrows
Arrows indicate the direction of
air flow into, out of, or around the
house. Colour indicates if warm (red),
cool(blue) or ventilating at very low
level fan speeds (green).
14 Roof temperature
Current temperature inside your
roofcavity.
15 Room temperature
Current temperature inside your
house.
16 Heat Transfer / HRV+ (HS) arrow
This shows when the Heat
Exchanger or Heat Transfer system
is on and actively moving air from
front to back of house.
17 Summer Kit
Accessories add-on product which
brings cool air in summer directly
from outside (when useful) by
passing the roof. When activated,
this symbol will show on the keypad.
18 Burnt Toast
Use for:
• Condensation – clears any extra
condensation that may have been
trapped behind closed curtains
etc, with an extra boost of air into
the house.
• Summer time – heat dump which
purges cavity air in the early
evening, thereby reducing the
temperature of the house and
roof cavity earlier.
• Clearing odours and smells.
To Next Page
Loading...
Need help?
General