GET TO KNOW YOUR CONTROLLER
1 On/O button
Turns the system o. Press button
once to turn o and once again to
turn back on.
2 Locking icon
When the keypad locking function is
engaged, the lock symbol will show
(Press and hold the power button
to turn on and again to release
thelock).
3 Heating icon
When the system is trying to heat
the house to set temperature, this
symbol will show. The arrows and
house temperature numbers will
also indicate this state with the
colour red.
4 Ventilation icon
This symbol will show when the roof
space temperature is inadequate
to heat your house to the ideal
temperature and the system has
reduced fan speeds to very low
levels to ventilate the house. This
is needed to make sure air is still
moving through the house and
condensation and moisture is
controlled. All numbers and arrows
will be green at this point.
5 Ventilation setting
This shows the level of ventilation
for your home. Levels range from
1- 6 (1being less air and 6 being
more air). To set this level accurately
IDEAL TEMP
MENU
BURNT
TOAST
18:00
MENU
21
FILTER
!
18
28
ATU
SK
HS
ATU
HS
6
1
10
11
12
13
14
13
15
13
16
17
18
2
3
4
5
6
7
8
9
To Next Page
Loading...
Need help?
General