3. Tap Bluetooth. The Bluetooth screen opens.
4. If you don't see your headset listed, tap and then tap Scan to refresh the list.
5. When you see the name of your headset in the Available Devices section, tap
the name. HTC Desire 200 pairs with the headset and the headset connection
status is displayed in the Paired Devices section.
If automatic pairing fails, enter the passcode supplied with your headset.
When the Bluetooth headset is connected to HTC Desire 200, the Bluetooth
connected icon is displayed in the status bar.
Reconnecting a Bluetooth headset
Normally, you can easily reconnect your headset by switching on Bluetooth on
HTC Desire 200, and then turning on the headset.
However, you might have to connect manually if your headset has been used with
another Bluetooth device.
Make sure that the headset is discoverable. Refer to the headset manual for details.
1.
Slide the Notifications panel open, and then tap .
2. If Bluetooth is off, tap the Bluetooth On/Off switch to turn it on.
3. Tap Bluetooth. The Bluetooth screen opens.
4. Tap the headset’s name in the Paired Devices section.
5. If prompted to enter a passcode, try 0000 or 1234, or consult the headset
documentation to find the passcode.
If you still cannot reconnect to the headset, follow the instructions in Unpairing from a
Bluetooth device on page 134, and then follow the steps under Connecting a
Bluetooth headset on page 132.
133 Bluetooth
To Next Page
Loading...
