HTC Desire 200 - Switching the power on or off

Charging the battery
Before you turn on and start using HTC Desire 200, it is recommended that you
charge the battery.
§ Use only the adapter and the USB cable that came with HTC Desire 200 to charge
the battery.
§ Do not remove the battery from HTC Desire 200 while you are charging it using
the power or car adapter.
1. Insert the small end of the USB cable into the USB connector.
2. Insert the other end of the USB cable into the power adapter.
3. Plug in the power adapter to an electrical outlet to start charging the battery.
As a safety precaution, the battery stops charging if it overheats.
Switching the power on or off
Switching the power on
Press the POWER button.
When you turn on HTC Desire 200 for the first time, you’ll need to set it up.
Switching the power off
1. If the display is off, press the POWER button to turn it back on, then unlock the
screen.
2. Press and hold the POWER button for a few seconds.
3. Tap Power off on the options menu.
14 Unboxing