Reconnecting a Bluetooth headset
Normally, you can easily reconnect your headset by switching on
Bluetooth on HTC Desire 612, and then turning on the headset.
However, you might have to connect manually if your headset has been
used with another Bluetooth device.
1. Turn Bluetooth on and check the list of paired devices.
See Turning Bluetooth on or off on page 242.
2. Tap the headset’s name in the Paired Devices section.
3. If prompted to enter a passcode, try 0000 or 1234, or consult the
headset documentation to find the passcode.
If you still cannot reconnect to the headset, follow the instructions in
Unpairing from a Bluetooth device on page 244, and then follow the steps
under Connecting a Bluetooth headset on page 243.
Unpairing from a Bluetooth device
1. Turn Bluetooth on and check the list of paired devices.
See Turning Bluetooth on or off on page 242.
2. In the Paired devices section, tap next to the device to unpair.
3. Tap Unpair.
244 Wireless sharing
To Next Page
