HTC DURATIQ Accessories
D002998, 01.06
www.htc-floorsystems.com 49
7.3 Lighting Package
Lighting is used to illuminate the area
around the machine. There is the option to
have two lamps pointing forwards and one
lamp backwards.
The lamps have a magnetic base and spiral
cable. For this reason, they can be moved
about on the machine to suitable positions.
Pay attention to the cabling when handling
the machine's weights etc.
Turn the lamps on by pressing the button for
lighting.
Press once again to turn on the front lamps
only.
Press once again to turn on the rear lamp
only.
Press a fourth time to turn the lamps off.
The remote control has separate control for
front lamps and rear lamp. Symbols on the
display show which lamp(s) are active.
To Next Page
Loading...
