HTC EVO Design 4G - Go to a Website

Web and Data 174
When Sprint Hotspot is active and is ready to share its 3G connection, the 3G hotspot icon ( )
appears in the status bar. When Sprint Hotspot is active and is ready to share its 4G
connection, the 4G hotspot icon ( ) appears in the status bar.
Connect Your Computer to Sprint Hotspot
After setting up your device as a wireless router, connect your computer to your device’s Sprint
Hotspot and access the Internet.
Windows Vista or Windows 7 Computer
1. Click Start > Connect To.
2. In the Connect to a network dialog box, select the Sprint Hotspot name (or SSID), and
then click Connect.
Note: Your device’s wireless network may not show up in the list of available networks
immediately. Wait for a moment and then refresh the list to see the wireless network.
3. Enter the network key (if any) that you used when setting up Sprint Hotspot, and then
click Connect.
4. Click Close.
Windows XP Computer
1. Click Start > Connect To > Wireless Network Connection.
2. In the Choose a Wireless Network dialog box, select the Sprint Hotspot name (or
SSID), and then click Connect.
Note: Your device’s wireless network may not show up in the list of available networks
immediately. Wait for a moment and then refresh the list to see the wireless network.
3. Enter the network key (if any) that you used when setting up Sprint Hotspot, and then
click Connect.
Manage Sprint Hotspot
You can set the number of computers or devices or allow only specific devices to connect and
use Sprint Hotspot to connect to the Internet.
1. Touch > > Sprint Hotspot.
2. Touch OK on the introduction screen.