Device Settings 53
Vibrate
To set your device to vibrate instead of making any sounds:
► Press the volume down button in standby mode until you see the image below on the
screen.
The device vibrates and the vibrate mode icon ( ) appears on the status bar.
To set your device to always vibrate in addition to any ringer settings:
1. Touch > > Settings > Sound.
2. Select the Vibrate check box.
3. Touch
.
Volume
You can separately adjust your device’s ringtone, media and alarm volumes, and notification
sound.
1. Touch > > Settings > Sound > Volume.
2. Drag the volume sliders on the screen to adjust the ringtone, media, alarm, or
notification volume, and then touch OK.
Note: You can adjust the ringer volume in standby mode (or the earpiece volume during a call)
by pressing the volume up or down button.
Incoming Calls
Phone Ring Tone
Select a default ring tone for incoming calls. Your device provides a variety of ring tones that
you can set as the default ring tone of your device.
1. Touch > > Settings > Sound.
2. Touch the ring tone you want to use, and then touch Apply. The ring tone briefly plays
when selected.
To Next Page
Loading...
