Tools and Calendar 221
Set Up HTC Sync to Recognize Your Device
1. Do one of the following:
Connect your device to the computer with the supplied USB cable.
If your device is already connected, touch and hold the status bar and drag your
finger down to open the Notifications panel. Then touch the status that shows Select
to change USB connection type.
2. On the Choose a connection type screen, touch HTC Sync > Done.
3. Your device will attempt to find HTC Sync on your computer. Wait for a few seconds for
the process to finish.
Note: If your device displays a message indicating that it’s unable to find HTC Sync, try
disconnecting and reconnecting the USB cable, and then repeat steps 1 to 2.
4. When your device finds HTC Sync, your computer will display the Phone Connection
Wizard. Click Next.
5. Enter the name you want for your device, and then click Finish. The Device panel
opens.
Tip: Check the HTC Sync icon at the bottom right side of your computer screen. If it has a
green arrow ( ), that means your device has successfully connected with your
computer and HTC Sync recognizes your device.
Get to Know the HTC Sync Workspace
After HTC Sync recognizes your device, use the Device panel to set your sync options, see your
device’s general information, check the used and available space on your microSD card, and
begin synchronization.
To Next Page
Loading...
