Introduction HTC GL 25 D
4 1.1
7. Current (A)
8. Frequency (Hz)
9. Weight (kg)
10. Address field
1.8 Handling and storage
The machine should be stored in a heated, dry area when not in use. Otherwise it may
be damaged by condensation and cold.
In the operating position, the dust extractor is 189 cm high, but it can be lowered so it is
only 154 cm high, which makes transport and maintenance work easier.
The machine can be lowered to the transport position, which facilitates transport and
maintenance work. See Figure3-2, page9 when lifting. Make sure that all the
constituent parts of the machine are properly assembled before lifting.
Warning!
If handled carelessly, the machine can overturn and cause both personal injury
and damage to the equipment. Ensure that there are always two people present
when it is to be rotated.
1.9 Noise
Warning!
Always use hearing protection when using the machine.
This machine is tested for noise in accordance with ISO 3741 . For information on the
sound pressure level and sound power level for each model, see the table in Chapter
To Next Page
Loading...
