HTC GL 25 D - 8 Environment; Chassis; Dust Extractor; Electrical System

Environment HTC GL 25 D
40 1.1
8 Environment
HTC products are constructed mainly of recyclable metal and plastic. The main
materials used are listed below.
8.1 Chassis
Machine part Material Waste management
Frame Metal, powder-coated Metal recycling
Front wheels Metal, plastic and rubber Metal recycling
Back wheels Plastic Plastic recycling/combustible
8.2 Dust extractor
Machine part Material Waste management
Cylinder Metal, powder-coated Metal recycling
Longopac holder Plastic, ABS Plastic recycling/combustible
Cover Metal, powder-coated Metal recycling
Camlock Metal inc. aluminium
Metal recycling
1)
Hose Plastic (PUR) and metal wire Plastic recycling/combustible
HEPA filter Hepa 13 Metal, glass fibre reinforced paper and
hot-melt adhesive
Metal recycling
2)
Main filter Metal, polyester and hot-melt adhesive
Metal recycling
2)
1)
If possible, different metals should be separated.
2)
If the filter contains any hazardous substance from the grinding dust, it must be
treated as hazardous waste.
8.3 Electrical system
Cables Copper conductors with Neoprene and PVC
coating
Waste cable
Motor Metal: Steel, aluminium and copper Electronic waste
Control cabinet Stainless steel and sheet metal
Metal recycling
1
Electrical components Metal and plastic Electronic waste
1)
If possible, different metals should be separated.