HTC GL 25 D - Page 13

HTC GL 25 D Safety
1.1 7
Note!
The machine should be stored in a dry, warm (above zero) location when not in
use.
Note!
If the dust extractor is stored in a cold location (below zero), it must be placed
in a warm location (above zero) for at least two hours before use.
Note!
Discolouration on the top of the HEPA filter indicates that the main filter is not
functioning as it should. If the HEPA filter is dirty on the underside, the filter is
defective.
Note!
When checking the HEPA filter, the machine must be placed in the operating
position.
Note!
Anti-static hoses must be used when coupling to the grinder and dust extractor.