98 3A. Sprint Service: The Basics
To place roaming calls with Call Guard on:
1. On the Phone screen, dial 1 + area code + the seven-digit number and tap .
2. Select
Roam Call.
To answer incoming roaming calls with Call Guard on:
1. Press . (A message will be displayed notifying you that roaming charges will apply.)
2. Tap
Answer.
Data Roam Guard
Depending on service availability and roaming agreements, your device may be able to access data
services while roaming on certain digital systems. You can set your device to alert you when you are
roaming off the Nationwide Sprint Network and try to use data services such as messaging.
To set your Data Roam Guard notification:
1. Press
> > Settings > Wireless & networks > Mobile networks.
2. Tap
Data Roam Guard.
䡲 Default enables data roaming internationally. The Data Roam Guard may display a confirmation
message and alert.
䡲 Always ask sets your device’s Data Roam Guard feature on. You will see a prompt and will be required
to respond anytime you access data services while roaming.
䡲 Never ask turns your device’s Data Roam Guard feature off. You will not be notified of your roaming
status when accessing data services.
To use data services when Data Roam Guard is active:
䊳 When a pop-up notification appears informing you that data roam charges may apply, tap Roam to
connect.
Note
Your device’s Call Guard is turned off by default.
Voice dialing and speed dialing are not available when you are roaming with Call Guard enabled.
Note
If the Call Guard check box is selected, you need to take extra steps to make and receive roaming calls.
Note
Your device’s Data Roam Guard is turned off by default.
To Next Page
Loading...
