HTC Hero - Speed Dialing; Entering Text

2A. Device Basics 17
Device Basics
Dialing From the People List
1. Press and tap People.
2. Tap the entry you want to call.
3. Tap
Call [Type of Number]. (For example, Call mobile.)
Speed Dialing
Your device can store up to nine phone numbers in speed dial locations.
To assign a speed dial number to a People entry:
1. Press , tap
People, and then tap an entry in People.
2. Press and tap
More > Set speed dial.
3. Tap the list menu under
Number to select a number from the contact to assign to speed dial.
4. Tap the list menu under
Location to assign the number to a speed dial location.
5. Tap
Save.
To call using Speed Dial:
䊳 Press and hold the appropriate key on the Phone keypad for approximately two seconds.
The display confirms that you have dialed the number when it shows “Dialing” on the upper right side of
the screen.
Finding Speed Dial Numbers
1. Press and tap .
2. Press and tap
Speed dial.
3. Tap a speed dial entry to call the contact.
Entering Text
Using the Onscreen Keyboard
When you start a program or select a box that requires text or numbers, the onscreen keyboard becomes
available. You can choose from three keyboard layouts:
QWERTY, Compact QWERTY, and Phone Keypad.
Note
If you assign a number to an already in-use speed dial location, the new phone number will automatically replace
the previous speed dial assignment.
Note
Speed dialing is not available when you are roaming; when you are roaming off the Nationwide Sprint Network,
you must always dial using eleven digits (1 + area code + number).
Tip
While on the Speed dial screen, press and tap Add to add new speed dial entries from People.