HTC Outfeed Rollers HOR-1038U - Page 7

BASE LINE
CENTER LINE
CENTER LINE
BASE LINE
MAIN FRAME MOUNTING TEMPLATE
SET BASELINE AT 3
1
/2" BELOW
TOP FINISHED SURFACE OF
MACHINE TABLE
TAPE THIS TEMPLATE TO MACHINE CABINET
WITH “BASE LINE” EXACTLY 3
1
/2" BELOW
FINISHED SURFACE OF MACHINE TABLE AND
“CENTER LINE” ON CENTER OF MACHINE
CENTER PUNCH 4 POINTS ABOVE, AND DRILL PILOT HOLE WITH
1
/8" DRILL. THEN ENLARGE WITH
11
/32" DRILL FOR
5
/16" MOUNTING BOLTS.
FOR MODELS HOR-1026U HOR-1038U
TM
7
WARNING:
Donotattempttousethe
productifpartsaremissing.
Contactfactoryat800-624-2027
toobtainthenecessaryparts.






















Roller
Frame
Main Frame