Need help?Do you have a question about the HTC Outfeed Rollers HOR-1038U and is the answer not in the manual?
General| Brand | HTC |
|---|---|
| Model | Outfeed Rollers HOR-1038U |
| Category | Racks & Stands |
| Language | English |
Expresses gratitude for purchasing the HTC Outfeed Rollers and encourages feedback.
Highlights the unique patented features and benefits of the HTC Outfeed Rollers.
Warns about potential hazards and emphasizes the importance of caution, common sense, and reading instructions.
Lists essential safety rules for operating tools safely, covering work area, apparel, alertness, and proper use.
Provides specific instructions for Delta Unisaw owners regarding the LVC box before installing the outfeed roller.
Step-by-step guide to lowering the Low Voltage Controller box on Delta Unisaw for proper outfeed roller installation.
Instructs users to separate and verify all parts against the hardware chart after unpacking.
Details the use of the included template for accurately positioning and marking mounting holes for the main frame.
Lists all necessary tools required for assembling and installing the outfeed roller system.
Guides on positioning the template and mounting the main frame to the table saw cabinet.
Explains how to attach the lower bracket, cams, pivot bolts, and roller frame to the main frame.
Covers installing rollers, leveling, drilling lower holes, and final tightening of fasteners.
Explains the cam-action mechanism for adjusting roller height to support miter gauge bars or workpieces.
Details the recommended procedure for safely folding and storing the outfeed rollers.
Provides guidance on cleaning, lubricating, and maintaining the outfeed rollers for longevity.
Outlines the terms, conditions, and coverage period for the limited lifetime warranty on HTC Products.
To Next Page
