250 Managing Your Device
13.7 Resetting Your Device
Performing a soft reset
Perform a soft (normal) reset to clear all active program memory and shut down all
active programs. This is useful when your device is running slower than normal, or a
program is not performing properly. If a soft reset is performed when programs are
running, unsaved work is lost.
To perform a soft reset
1. Pull out the stylus.
2. Remove the back cover. For instructions, see “To remove the back cover” in
Chapter 1.
3. Use the stylus tip to press the RESET button located at the upper-left side of
the open back panel.
Your device restarts and displays the Home screen.
4. Replace the back cover and insert the stylus back into its compartment.
To Next Page
Loading...
