HTC Touch Diamond DIAM100 - Using the Strap Holder

Getting Started 29
1.4 Using the Strap Holder
The strap holder at the bottom panel of your device allows you to attach a
wrist strap, neck lanyard, or string accessory.
To attach a strap, lanyard or string accessory to the strap holder
1. Remove the back cover.
2.
Insert the loop of the strap,
lanyard or string accessory
through the strap holder
hole.
Tip To pass through the
strap holder easier,
push the loop into the
strap holder hole using
a pointed object such as
a needle or toothpick.
3. Attach the loop over the
small hook at the bottom of
the back side of the device.
4.
Slightly pull the strap,
lanyard or string accessory
to fix it securely in place.
5. Replace the back cover.